CHAPTER IV

Equation insertions

All chapters

The same operator grammar was placed into several established formulas. These are implementation locations, not independent confirmations.

Poisson source-density lane

Baseline:

∇2Φ=4πG(ρb+ρgas+ρhalo).\nabla^2\Phi=4\pi G(\rho_b+\rho_{\rm gas}+\rho_{\rm halo}).

Augmented halo-only source:

∇2Φ=4πG[ρb+ρgas+ρhalo+f⊥(Kd∗ρhalo−ρhalo)].\nabla^2\Phi=4\pi G\left[\rho_b+\rho_{\rm gas}+\rho_{\rm halo} +f_\perp(K_d*\rho_{\rm halo}-\rho_{\rm halo})\right].

X = rho_halo only. BCG, gas, total convergence, and cumulative projected mass are not smoothed in the valid B2 implementation.

Lensing convergence lane

κbase=κb+κgas+κhalo,\kappa_{\rm base}=\kappa_b+\kappa_{\rm gas}+\kappa_{\rm halo},
κaug=κb+κgas+(1−f⊥)κhalo+f⊥(Pd∗κhalo).\kappa_{\rm aug}=\kappa_b+\kappa_{\rm gas} +(1-f_\perp)\kappa_{\rm halo}+f_\perp(P_d*\kappa_{\rm halo}).

The HFF map-transfer diagnostic instead used a named target-team map as X and compared it with two other public model-team products; that is a model-product consistency test, not a decomposed physical halo likelihood.

NFW / halo-profile lane

ρaug(r)=(1−f⊥)ρNFW(r)+f⊥(Kd∗ρNFW)(r).\rho_{\rm aug}(r)=(1-f_\perp)\rho_{\rm NFW}(r)+f_\perp(K_d*\rho_{\rm NFW})(r).

The SIDM Concerto runs compare this augmented CDM/NFW profile with a matched public parametric cored/SIDM reference. Since any low-pass operator removes a cusp, the direction is mechanically favorable; matched controls are essential.

Jeans lane

The standard spherical Jeans equation is retained:

d(νσr2)dr+2βrνσr2=−νGM(<r)r2.\frac{d(\nu\sigma_r^2)}{dr}+\frac{2\beta}{r}\nu\sigma_r^2 =-\nu\frac{G M(<r)}{r^2}.

The dwarf-spheroidal adapter acts only on the three-dimensional NFW halo density:

dg=ηr1/2,g,ρh,aug=(1−f)ρNFW+f(Kdg∗ρNFW),d_g=\eta r_{1/2,g}, \qquad \rho_{h,\rm aug}=(1-f)\rho_{\rm NFW}+f(K_{d_g}*\rho_{\rm NFW}),
Maug(<r)=M⋆(<r)+4π∫0rρh,aug(r′)r′2dr′.M_{\rm aug}(<r)=M_\star(<r)+4\pi\int_0^r \rho_{h,\rm aug}(r')r'^2dr'.

No separate free residual map is added, and the stellar tracer/mass is not convolved. Development calibration selected f=0; the forced nonzero diagnostic was slightly adverse on both heldout galaxies. Full details are in JEANS_DSPH_ADAPTER.md.

Direct formal-source rerun

A later run applied exactly the same direct density-source equation to Draco and Ursa Minor. Those galaxy identities had already been exposed during a superseded internal prototype, so the result remains post-exposure. It used

ρ⊥=f(Kd∗ρNFW−ρNFW),M⊥(<r)=4π∫0rρ⊥(r′)r′2dr′,\rho_\perp=f(K_d*\rho_{\rm NFW}-\rho_{\rm NFW}),\qquad M_\perp(<r)=4\pi\int_0^r\rho_\perp(r')r'^2dr',

and inserted M_perp directly on the Jeans right-hand side. No response projection was used. The development-safe policy again selected f=0; the frozen nonzero diagnostic produced a small aggregate delta chi-square = -0.001159399 (0.005077%) with both galaxy deltas negative. This is a post-exposure direct-source diagnostic, not fresh proof or material uplift. See JEANS_DSPH_FORMAL_SOURCE_CORRECTIVE.md.

SPARC circular-velocity lane

For a SPARC galaxy, the fixed baryonic contribution is

Vbar2(R)=Vgas∣Vgas∣+0.5Vdisk∣Vdisk∣+0.7Vbulge∣Vbulge∣.V_{\rm bar}^2(R)=V_{\rm gas}|V_{\rm gas}| +0.5V_{\rm disk}|V_{\rm disk}| +0.7V_{\rm bulge}|V_{\rm bulge}|.

The per-galaxy baseline is

Vbase2(R)=Vbar2(R)+GMNFW(<R;V200,c)R.V_{\rm base}^2(R)=V_{\rm bar}^2(R) +\frac{G M_{\rm NFW}(<R;V_{200},c)}{R}.

The shared equation adapter ties the 3D-kernel scale to the measured disk scale length:

dg=ηRdisk,g,ρaug,g=(1−f)ρNFW,g+f(Kdg∗ρNFW,g),d_g=\eta R_{{\rm disk},g}, \qquad \rho_{{\rm aug},g}=(1-f)\rho_{{\rm NFW},g} +f(K_{d_g}*\rho_{{\rm NFW},g}),
Vaug2(R)=Vbar2(R)+GMaug(<R)R.V_{\rm aug}^2(R)=V_{\rm bar}^2(R)+\frac{G M_{\rm aug}(<R)}{R}.

The development-selected shared policy was f = 1.0, eta = 0.125, frozen before heldout evaluation. It acts on halo-only 3D density. Each galaxy still receives its own baseline NFW nuisance fit, so this lane tests transfer of the shared adapter rather than clean end-to-end prediction.

X-COP hydrostatic-equilibrium lane

The canonical electron-pressure hydrostatic equation is retained:

dPedr=−μmpne(r)GMtotal(<r)r2.\frac{dP_e}{dr} = -\mu m_p n_e(r)\frac{G M_{\rm total}(<r)}{r^2}.

The published X-COP hydrostatic NFW mass is the baseline total gravitating mass. The dark-halo component is reconstructed as

ρdm=ρNFW,total−ρgas−ρ⋆,\rho_{\rm dm} = \rho_{\rm NFW,total}-\rho_{\rm gas}-\rho_\star,

and only that component receives the three-dimensional redistribution:

ρdm,aug=(1−f)ρdm+f(Kd∗ρdm).\rho_{\rm dm,aug} =(1-f)\rho_{\rm dm}+f(K_d*\rho_{\rm dm}).

The augmented mass used on the unchanged hydrostatic right-hand side is

Maug(<r)=MNFW,total(<r)+f[M[Kd∗ρdm](<r)−M[ρdm](<r)].M_{\rm aug}(<r) = M_{\rm NFW,total}(<r) +f\left[M[K_d*\rho_{\rm dm}](<r)-M[\rho_{\rm dm}](<r)\right].

No projected-kappa proxy, total-profile smoothing, or response-space transformation is used. The development-selected shared policy was f=1.0, d=0.01 R500, frozen before scoring the three heldout cluster identities. Here f=1.0 is the full-smoothed-profile replacement endpoint of the declared operator family, not the legacy partial f=0.30 mixture. See XCOP_HYDROSTATIC_DIRECT_FORMAL.md.

Program C Friedmann/background-fluid lane — a different term

H2(z)=H02[Ωm(1+z)3+Ω⊥(1+z)q+1−Ωm−Ω⊥].H^2(z)=H_0^2\left[\Omega_m(1+z)^3+\Omega_\perp(1+z)^q +1-\Omega_m-\Omega_\perp\right].

This represents rho_perp(a) = rho_perp,0 a^-q, with w_perp = -1 + q/3. It is not the cluster redistribution operator and is reported separately. The stored H(z) smoke found essentially no chi-square gain and worse information criteria.

Einstein equation — container/design only

Gμν+Λgμν=8πG(Tμνknown+Tμν⊥,eff).G_{\mu\nu}+\Lambda g_{\mu\nu}=8\pi G\left(T^{\rm known}_{\mu\nu}+T^{\perp,\rm eff}_{\mu\nu}\right).

A valid covariant implementation must conserve total stress-energy and reduce to the frozen weak-field operator. This repository does not claim that a complete covariant T_perp_eff was implemented or validated. The Einstein equation remains a formal container/design lane.